2 50mm 2 inch 5×4.5 to 5×4.5 Black Wheel Spacers for Ford Mustang Edge Ranger Explorer

This Wheel Spacer Kit Comes with Everything Needed for a Full Installation! Specifications – Vehicle Bolt Pattern: 5×4.5Wheel Bolt Pattern: 5×4.5Hub Bore: 82.5mm – Thread Pitch: 1/2 inch x 20Thickness: Each Spacer Measures 2 inch inch Thick – Vehicle Fitments – THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES1967-2014 Ford Mustang2007-2014 Ford Edge2003-2004 Ford Mach 11991-2011 Ford Crown Victoria1982-1990 Ford Bronco Does not fit XLT Model1981-2011 Ford Ranger1991-2015 Ford Explorer – Additional Information – Please ensure that the your vehicle has the same studs as the adapters otherwise additional lugs WILL BE required – Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening Failure to do so can result in damage to your vehicle – Installation needs to be performed by a trained professional It’s Possible that you OEM Studs are longer than the spacer is thick if so you have a few options:Your lugs studs will need to be shortened by grinding them down – You can replace your studs will shorter studsif you wheels have cavities in the backside between the mounting holes then you should be OK will need to make sure flushALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

• Please ensure that the your vehicle has the same studs as the adapters otherwise additional lugs WILL BE required
• Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening Failure to do so can result in damage to your vehicle
• Installation needs to be performed by a trained professional