No products in the cart.
This Wheel Spacer Kit Comes with Everything Needed for a Full Installation! Specifications Vehicle Bolt Pattern: 5×4.5 Wheel Bolt Pattern: 5×4.5 Hub Bore: 82.5mm Thread Pitch: 1/2″ x 20 Thickness: Each Spacer Measures 2″ inch Thick Vehicle Fitments THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES 1967-2014 Ford Mustang 2007-2014 Ford Edge 2003-2004 Ford Mach 1 1991-2011 Ford Crown Victoria 1982-1990 Ford Bronco Does not fit XLT Model 1981-2011 Ford Ranger 1991-2015 Ford Explorer Additional Information Please ensure that the your vehicle has the same studs as the adapters otherwise additional lugs WILL BE required Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening Failure to do so can result in damage to your vehicle Installation needs to be performed by a trained professional It’s Possible that you OEM Studs are longer than the spacer is thick if so you have a few options: Your lugs studs will need to be shortened by grinding them down You can replace your studs will shorter studs if you wheels have cavities in the backside between the mounting holes then you should be OK will need to make sure flush ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS
- REQUIRED that youCheck your vehicle compatibility in Product Description BEFORE buying
- T6 6061 Billet Wheel Adapters 12.9 Grade Steel Threads
- Mainly used to give your vehicle an agressive stance and will help with any clearance issues if present
- CNC Machined Usings Aerospace Aluminum