AFP 6ft Double Leg Internal Shock Absorbing Safety Fall Protection Lanyard with Dual Aluminum Pelican Rebar Steel Snap Hook |Heavy-Duty Webbing |

SAFE The AFP 6 FT Double Leg Internal Shock Absorbing Lanyard is made with a lightweight heavy-duty high-strength outer polyester webbing and a polyester core specially sewn in to reduce impact forces with two substantially secure heavy-duty double-locking gates. DURABLE The tough webbing is highly resistant to abrasion aging and wont soften from frequent use. This webbing has low shrink properties and a high temperature threshold. CONVENIENT Our most popular 2-in-1 fall arrest double lanyard that minimizes trip hazards or fall with a shock absorber built into the lanyard eliminating the need for an additional bulky shock pack. Elasticated leg expands from 4-1/2 to 6 feet and can resist 8500 lbs. of tensile strength! COMPLIANT Meets all applicable strict requirements of the American National Standards Institute and in compliance with the Occupational Safety and Health Administration ANZSI Z359.13-13 ANSI A10.32-12 OSHA 1926 Subpart M OSHA 1910 including the stringent ANSI Z359.1. SPECIFICATIONS: Standard length per leg: 4-1/2 ft. Extended length per leg: 6 ft. Max Freefall: 6 ft. Connectors: 2 Aluminum Rebar and 1 Steel Snap Hook Worker Capacity Range: 130-310 lbs. Strength: Min. 8500 lbs. tensile strength Average Arrest Force: Less than 900 lbs. Connectors Material: Forged Heat-Treated Alloy Steel; Min. 5000 lbs. tensile strength Connector Gates: Alloy Steel; Min. 3600 lbs. front load and sideload Applicable Standards: ANSI Z359.13-13 ANSI A10.32-12 OSHA 1926 Subpart M OSHA 1910. The AFP Double-Leg Internal Shock Absorbing Aluminum Rebar Lanyard is comprised of heavy-duty webbing designed to diminish the risks of falling or slipping. The tough webbing is highly resistant to abrasion aging and wont soften from frequent use. This webbing has low shrink properties and a high-temperature threshold. Constructed to scale down the impact forces resulting from fall this Shock Absorbing Lanyard assists workers in effectively moving and position themselves on the job site. The shock absorber is built within the lanyard making this a lightweight 2-in-1 feature that eliminates the need for a bulky shock pack. This shock-absorbing lanyard does not extend past 6 FT unless impacted by the force of fall and must be used in conjunction with a full-body harness. Built tough to limit fall forces up to 900 lbs. or less. Forged steel connectors are corrosion resistant and have a 3600 lb. gate strength. The lanyard and its double-locking connectors are all ANSI compliant and are easy-to-use. Meets OSHA and ANSI standards including the stringent ANSI Z359.1.