No products in the cart.
3D WALL PANEL INSTALLATION MANUAL 1. PREPARATION FOR THE WALL All the basic wall must be flat dry clean and firm. If the wall is Aged the surface must be painted with water-based seal primer to fix the loosen surface firstly. 2. PREPARATION FOR THE WALL PANEL Open the box and take out the panels very carefully. Put the panels on the clear and dry floor for 24 hours to balance the moisture between panels and environment to prevent excessive expansion or contraction after installation. 3. MEASURE THE WALL Measure the size of wall to find out the central point of it then mark vertically and horizontally. Arrange it on the floor by rotating the panels before attempting to install ensuring correct installation of the desired pattern. 4. INSTALL THE COMMODITIY ON THE WALL Put the heavy duty construction adhesive to the lower parts of panel back to put the adhesive higher than the panel back. Apply the panels on the wall same as planned design pressing the panels’ edges to ensure all the panels adjoin the wall tightly Clean the glue which is flow out of the panels. It will be better to set aside it two hours for drying then move to the next step. 5. CUT EDGES TRIMMING AND PAINTING If the cut edges of panels meet the corner or end of wall fill the cut edges with sheet rock compound/acrylic caulking. If additional finish is needed paint the panels with oil base lacquer. PREMIUM MATERIAL: Made of premium PVC thin and light yet sturdy durable. geometric design SUPERIOR FEATURES: Visual-catching waterproof fire-resistant high-strength easy DIY
- Size: 30 x 30 cm. One box comes in 33 black coloured tiles which cover 3m.
- PREMIUM MATERIAL – Made of premium PVC material thin and lightweight but sturdy durable. Geometric design.
- Superior Features: eye-catching waterproof flame retardant high strength easy DIY assembly.