No products in the cart.
Many professionals consider Awlgrip Two-Part Linear Polyurethane to be the benchmark by which other topcoats are measured. Famous for its high gloss and chip-resistant durability Awlgrip two-part polyurethane enamel provides resin-rich clean bright color. May be applied by brush spray or roller when used with the appropriate converters. Awlgrip paints are lead-free and comply with Federal regulations. Recommended only for professional applicators using proper safety equipment. Alwgrip Two-Part Linear Polyurethane should not be applied below the waterline. Once it cures it requires very little maintenance and should not be waxed buffed compounded or polished. Key Features High performance polyester urethane topcoat system Can be applied by spray or “roll and tip” methods Excellent color retention and chemical resistance Superior flow and leveling Tough and durable with outstanding longevity Repairable; conventional polyester urethanes can sometimes be difficult to repair For above-the-waterline application on properly prepared and primed fiberglass wood steel and aluminum substrates Physical Data Base Formulation: To-component linear aliphatic polyester polyurethane Finish: High gloss VOC Base: 470g/l or 3.9lb./gallon VOC Spray Converter: G3010 591g/l or 4.9 lb./gallon VOC Brush Converter: H3002 276g/l or 2.3lb./gallon Application Recommended Application Method: Brush roller or spray Number of Coats Recommended: Spray: 2-3; Brush or roller: 2 Primer Needed: Spray: 545 Primer; Brush or roller: AwlQuick Primer Drying Time to Recoat: Spray: 1-4hrs. ; Brush or roller: At least 16hrs. Drying Time to Full Cure: 14 days Coverage: Spray: 530sq.ft./gal. ; Brush or roller: 700-725 sq.ft/gal. Converters/Reducers/Accelerators: Selected according to application method brush or spray ambient temperature and other factors Converters Awlgrip two-part painting systems require the mixing of a base and a converter. Converters are sold separately. For spray applications Awlgrip is mixed in a ratio of 1:1 one part base to one part converter. G3010. For brush applications Awlgrip is mixed in a ratio of 2:1 two parts base to 1 part converter. H3002. Both types of converters are listed below: Use Description AWLGP# Model For Spray: G3010 Awl-Cat #2 Spray Converter-Quart G3010/1QTUS 339523 For Spray: G3010 Awl-Cat #2 Spray Converter-Gallon G3010/1GLUS 339515 For Brush: H3002 Awl-Cat #3 Brushing Converter-Pint H3002/1PTUS 339531 For Brush: H3002 Awl-Cat #3 Brushing Converter-1/2 Gallon H3002/1HGUS 339549 For Spray: G3039 Awl-Cat #5 Converter VOC Exempt-Gallon H3002/1HGUS 16361594 Reducers The following reducers can be used with Awlgrip Topcoat. Please consult the Awlgrip Application Guide for guidance on reducer selection and use. Reducer AWLGP# Model Fast Evaporating Topcoat Reducer T0001/1GLUS 340729 Fast Evaporating Topcoat Reducer T0001/1QTUS 340711 Fast Evaporating Topcoat Reducer and Equip. Cleaner T0002/1GLUS 340745 Standard Reducer for Spraying Topcoat T0003/1GLUS 340760 Standard Reducer for Spraying Topcoat T0003/1QTUS 340752 Hot Weather Reducer T0005/1QTUS 297046 Brushing Reducer T0031/1GLUS 340786 Brushing Reducer T0031/1QTUS 340778 Fast Reducer VOC Exempt OT0163/1GLUS 14961270 Fast Reducer VOC Exempt OT0163/1QTUS 14961262 Standard Reducer VOC Exempt OT0167/1GLUS 14961296 Standard Reducer VOC Exempt OT0167/1QTUS 14961288 Hot Weather Reducer VOC Exempt OT0168/1QTUS 14961304 More information For detailed application instructions including product components reducers additives and auxiliary components see the Awlgrip Two-Part Linear Polyurethane Data Sheet. NOTE: Data sheets are sometimes revised by the manufacturer. Linked data sheets are believed to be accurate at the time of publication. For the complete range of available colors see the AWLGRIP /AWLCRAFT 2000/AWLCRAFT SE Color Card.