No products in the cart.
This Mini Power Sluice Setup Kit featuring Mini Dream Matting includes: 32 inchL x 6 inchW x 3 inch deep sluice AND 8 inch x 6 inch x 6 inch header box AND 8.5 inch x 24 inch sluice stand AND flare AND 12 volt 1200 gph pump AND 5 feet of 1.25 inch hose AND alligator clips. Ideal for sandy areas and black sands. Bed of sluice contains 16 inches of NEW Mini Dream Mat — the first sluice mat ever to be scientifically engineered and designed using advanced fluid dynamic principles and physics. The mini Hydro-Cyclone inspired vortex cells classify separate capture and hold gold naturally. Dream Mats vortex cells exploits natures own forces in a patented system to bring the finest gold recovery ever created. These mini cells are engineered to capture the finest of gold without needing huge amounts of water to maintain good exchange. This mini cell system is designed for classified feeds 8 mesh is a good screen size but you can screen lower if desired. Bigger gold is really heavy and Dream Mat captures and holds the bigger gold in its vortex holding cells just like it does with fine gold. Instructions: 1. Put the legs on the stand so that the front legs are shorter than the back legs. There should be about 4 inches more above the leg bracket than then front. This should provide a 15 degree slope or 1 inch per foot of drop. 2. Unbolt the flare and set aside. 3. Bolt on the header box in the same place where you took off the flare. 4. Place the sluice with the header box on the stand with the end without the header box under the slot on the stand. There are also side supports on the sluice stand. 5. Place pump in a bucket or stream or a tub filled with water if using indoors. 6. If using a tub place it under the discharge end of the sluice so you can recirculate the water. Place bucket with holes around the top in the tub to catch the waste material so it does not get sucked up by pump.