P1 drip tape utilizes innovative technology offering many benefits to the grower. A protected flow system devised by the Irritec research department allows the P1 to be buried in the soil without problems caused by encroachment of mud and debris and reduces the risk of root intrusion to a minimum. The system works through a special flap design on the outlet hole. During the irrigation cycle the flap opens allowing an even flow of water; when the cycle ends the flap returns to its resting position closing the hole and thus blocking any entry of mud and detritus. This drip tape is great for better coverage on longer runs. When you water slower and longer you also water deeper. P1 Ultra Tape works with T-Tape Aqua Traxx and Chapin Drip Tape Systems. Features: P1 drip tape has no seams for more reliability and uniform installation P1 drip tape is manufactured using injection molded drippers for a high degree of plugging resistance and uniform water distribution over long runs P1 drip tape is used in both above ground and subsurface installations with equal success The low profile drippers welded on the inside wall keeps friction loss to a minimum Each dripper has an integrated inlet filter to prevent clogging The turbulent flow path design is effective against clogging even at low pressures All P1 is resistant to UV rays and mechanical stress Drip Emitter CV’s are 2.5% or less Ideal for use in any applications where the row is straight Drip tape is not well-suited for curves or bends. Optimum Operating Pressure is 8 to 15 PSI based on mil thickness
- P1 drip tape has no seams for more reliability and uniform installation.
- P1 drip tape is manufactured using injection molded drippers for a high degree of plugging resistance and uniform water distribution over long runs.
- P1 drip tape is used in both above ground and subsurface installations with equal success.
- The low profile drippers welded on the inside wall keeps friction loss to a minimum.
- Each dripper has an integrated inlet filter to prevent clogging.