Kukko 21-2 Internal Extractor 14-19mm

For extracting inner bearings bearing outer rings and bushings. Product Data Sheet Description The 2-shell design with extra large grasp edges ensures safe extraction. The internal extractors are equipped with an internal safety stop to protect against excess spreading and overloading. Mechanical pressure screw. Advantage KUKKO internal extractors can be combined with counter supports 22-1 and slide hammers 22-0. When combined with the internal extractors extensions from series 21-V enable deeper bearings to be extracted. Spare parts are available for internal extractor sizes 21-89 and 21-90. How it works Place the internal extractor into the bearing’s hole. Using a ring spanner tighten the nuts to open the jaws of the internal extractor. Make sure that the jaws sit securely below the bearing’s inner race. For removal the spindle on the counter support series 22 or on the slide hammer series 22-0 is screwed onto the key spindle on the internal extractor. Counter support: 2. The counter support’s arms must not block the part due to be removed. Make sure that the arms are parallel.

• Internal extractor for extracting inner bearings bearing outer rings and bushings.
• The 2-shell design with extra large grasp edges ensures safe extraction.
• The internal extractors are equipped with an internal safety stop to protect against excess tension and overloading.
• Kukko internal extractors can be combined with counter supports and slide hammers.
• Mechanical pressure screw.