No products in the cart.
Most access control card readers keypads or readers with keypads that use standard Wiegand Data1/Data0 or Clock/Data communication are supported as are those that support the bidirectional RS-485 Open Supervised Device Protocol OSDP . Lock unlock and facility code offline access modes are supported on all readers connected to the DRI. Each DRI supports up to 16 different card formats as well as issue codes for both magnetic and Wiegand card formats. The DRI provides a vital link between the Intelligent System Controller ISC and the card reader attached to the interface. As many as 32 DRI modules can be multi-dropped using RS485 2-wire or 4-wire communication up to 4000 feet per port away from the ISC. Each DRI module is individually addressed for increased reporting capabilities with OnGuard access control software applications. The DRI includes eight inputs that support normally open normally closed supervised and non-supervised circuits. In addition six output relays support fail-safe or fail-secure operation. 12 or 24 VDC power supply Supports Data1/Data0 Clock/Data Supervised and Unsupervised F2F and OSDP-compatible RS-485 readers and keypads Supports Open Supervised Device Protocol OSDP readers including biometric template transfer and Secure Channel encryption Downloadable firmware Six Form-C 5 A at 28 VDC relay outputs Up to 16 different formats Issue code support for magnetic and Wiegand formats Door contact supervision open/closed REX push-button monitor Strike control output Bicolor reader status LED support and 2-wire LED support Beeper control Dedicated tamper and power failure circuits Support for offline reader access mode On-board jumpers for termination On-board regulator allows 12 VDC reader support from 24 VDC power source DIP switch-selectable addressing Advanced Encryption Standard AES 128-bit algorithm for communications to ISC Supports Schlage Handkey template download Compatible with current and previous versions of OnGuard
- 12 or 24 VDC power supply
- Supports Data1/Data0 Clock/Data Supervised and Unsupervised F2F and OSDP-compatible RS-485 readers and keypads
- Supports Open Supervised Device Protocol OSDP readers including biometric template transfer and Secure Channel encryption
- On-board regulator allows 12 VDC reader support from 24 VDC power source
- Downloadable firmware
- Lenel Series 3 Access Hardware