Monst Vehicle Exit Sensor Driveway Gate Exit Wand Sensor with 50 ft Compatible with Mighty Mule Ghost Controls Liftmaster Vehicle Door Opening

Induction range:2-12ft power supply:12 – 24 VDC or 12 – 24VAC Material:The pvc material effectively protects the WAND from damage. standby mode:Almost no current consumption during standby very environmentally friendly. Note : Firstly please ensure the distance from the wand to the gate full open position ismore than 25 ft. – Secondly please be noted that the radius of the sense range of the wand is 2-6 ft so please install the wand near the driveway as much as possible to ensure the wand can sense the vehicle past. – Thirdly please be noted that you should remain 5 feet long cable for connecting from ground to control board that means the distance from the wand to the control box should not exceed 45 feet. Trouble Shooting If the WAND is not working:Make sure all connections are correct. – Make sure the Range Adjustment is set at maximum range. – Disconnect the power to the WAND.Reconnect the power to the WAND and make sure that no metal object or vehicle is moving around the WAND for 60 seconds while it is calibrating. – Test the WAND to verify that it is working properly. Usually a door opening system can connect two sensors WAND but you only need to connect one so it is recommended that you turn on the “automatic closing system” of the door opening system