Osmo – UV-Protection Oil – 420 Clear Extra 2.5

Please purchase the .75L or .125L size. Clear satin wood finish based on natural oil for wood in outdoor areas. Microporous surface allows the wood to breathe and reduces swelling and shrinkage. Water repellent will not crack peel or flake. As top coat on already color treated wood Osmo UV-Protection Oil Extra prolongs the renovation intervals significantly. As a single product application it blocks the graying process on vertical surfaces with a UV protection factor 12 in comparison to untreated wood when two coats are applied. Osmo UV-Protection Oil Extra contains active ingredients to protect the coating against mold algae and fungal attack. Simply apply without sanding. Easy and seamless application. Finish stays workable while coating. Directions: Apply two thin coats with non-abrasive white scotchbrite pads Stir the Polyx -Oil well and pour into tray Work the product into the wood thinly and evenly in figure 8 or circular motions using a white pad Be sure to thinly and evenly coat the surface and leave on the surface for approx. 5 minutes With a clean white pad polish the surface ensuring no swirl marks rings or wipe marks Ensure all excess product is removed from surface Allow approx. 8-10 hours drying time. Allow for good ventilation whilst drying Apply second coat following previous steps. Coverage: 0.125L = 24 square feet 0.75L = 140 square feet 2.5L = 480 square feet