Rockville RX 230 2-way stereo/3-way mono rack-mountable crossover ability to mix 2 channels output 24DB/Octave filters mute switches channel gain control: 0 to +12 DB low-Frequency and frequency level control: – to +6 DB low frequency to high-Frequency crossover: 100Hz to 1 KHz x 10 range: Changes to mid frequency from 100 hz to 1 KHz to 1KHz to 10 KHz switchable 2-way stereo or 3-way mono operation subwoofer out subwoofer x-Over freq 30Hz – 200Hz adjustable subwoofer gain -6 to +6 db. Each output is -3 DB at the selected crossover frequency value. Outputs are essentially flat within their relative passband. Specifications: Distortion: Less than 0.02% THD / +4 DBu / 1 KHz Low frequency output: -86 DBu below 80 DB High frequency output: -84 DBu below -78 DB Maximum input level: +14 DBu channel gain / 0 DB input level controls set at 0 DB +22 DBu Maximum output level: +22 DBu unbalanced +28 DBu balanced Input impedance: 10k ohms unbalanced Dimensions: 19 x 4.85 x 1.8 inches Gross weight: 4.18 lbs.Connectors: Inputs: XLR balanced Outputs: XLR balanced Power requirements: 120V AC 50/60 hz 20 watts 110-120V voltage
- Rockville RX230 2-way Stereo / 3-way Mono rack mountable crossover. Ability to mix 2 channels output. 24dB/Octave filters. Mute switches.
- Channel Gain Control: 0 to +12 dB. Low Frequency Level Control: – to +6 dB. High Frequency Level Control: – to +6 dB.
- Switchable 2-way stereo or 3-way mono operation. Subwoofer out. Subwoofer X-Over Freq 30Hz – 200Hz adjustable.
- Subwoofer Gain -6 to +6 dB. Specifications: Each output is -3 dB at the selected crossover frequency value.
- Outputs are essentially flat within their relative passbands. Distortion: Less than 0.02% THD @ +4 dBu@ 1 kHz.
- Hum and Noise: Crossover controls set @ 1 k – Hz all level controls set at 0 d – B; 22 Hz to 22 k – Hz unweighted gain @ 0d – Bref +4d – Bu – 90d – B.
- Maximum Output Level: +22 dBu unbalanced +28 dBu balanced. Input Impedance: 10k ohms unbalanced. Dimensions: 19 x 4.85 x 1.8 inches.
- Gross weight: 4.18 Lbs. Connectors: Inputs: XLR Balanced. Outputs: XLR Balanced. Power Requirements: 120V AC 50/60 Hz 20 watts. 110-120V voltage.