No products in the cart.
Available in 9 brighter than normal colors which “glow” vividly under ultraviolet lights Rosco Fluorescent Paints can create a wide range of exciting effects. They can be used to create special effects using ultraviolet black light or combined with other Rosco Scenic Paints to make the colors more vibrant. Fluorescents use the same high quality water-base vinyl acrylic binder found in Off Broadway Paints. It is suitable for use on most surfaces after the surface has been properly prepped. Fluorescent pigments will degrade from prolonged exposure to ultraviolet light. Avoid direct sunlight where possible. Dilution Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary however this will reduce the hiding power of the paint and may reduce the brightness of the “glow.” Surface Preparation Surfaces should be clean dry and free from dirt and grease. Prime porous surfaces except fabrics using Rosco Tough Prime. If painting a new plaster surface prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic color effects. Application Stir contents well before use. Apply by brush roller or spray gun. Apply in thin uniform coats using a good quality brush or roller. Use overlapping strokes keeping a wet edge. Shelf Life Minimum shelf life for unopened sealed paint is approximately 24 months when stored in a temperature controlled location.
- Surface Preparation.
- Application.
- Minimum shelf life for unopened sealed paint is approximately 24 months when stored in a temperature controlled location.