No products in the cart.
Tuff Stuff is an extremely high-build two-part epoxy primer that dries fast enabling application of a complete barrier system and bottom paint in just two days. Using microsheet silicate technology millions of microscopic sheets overlap and build a 100% water barrier that protects the surface from moisture and water penetration. Premium blister protection with microsheet silicate technology. Extremely effective for blister prevention on fiberglass or as a bilge coating because it is resistant to oil and water. As a universal primer it can be used for corrosion protection on most metals below the waterline and for priming any metal. Creates an overlapping barrier to eliminate any direct path for water migration. Can be applied at 10-15 mils dry film in one coat using a brush roller airless or conventional spray. Fills deep scratches and gouges in a few coats and can be sanded within 8 hours to a smooth finish. Use over blistered fiberglass as a repair coat and over unblistered fiberglass as a barrier coat. Protects metals from corrosion including: aluminum bronze stainless steel cast iron and lead above and below the waterline. Excellent for priming props shafts keels trim tabs thru hulls and lower units. Highest build epoxy Fewer coats needed. Longer window between coats makes Tuff Stuff easy to use. Reduced labor and less haul out time.
- Dries faster and has a longer working time than Sea Hawk S-78 High Build Primer so multiple coats can be applied in one day
- Highest build epoxy fewer coats needed for reduced labor costs and less haul out time
- Can be applied at 10-15 mils dry film in one coat using a brush roller airless or conventional spray
- Fills deep scratches and gouges in a few coats and can be sanded within 8 hours to a smooth finish
- Use over blistered fiberglass as a repair coat and over unblistered fiberglass as a barrier coat
- Excellent for priming props shafts keels trim tabs thru hulls and lower units