No products in the cart.
GripX is an anti-slip floor finish and sealer formulated for use on both indoor and outdoor surfaces to effectively increase traction. This non-slip concrete coating can be used to enhance both shoe and barefoot traction over concrete brick and travertine walkways and many other surfaces around pools. The anti-slip coating can be used on various surfaces such as stamped concrete patios decks and natural stone like limestone flagstone quartz slate and marble. Its versatility and durable features make GripX non-slip concrete tile and concrete sealer an excellent choice for high-traffic areas such as bathrooms and kitchens and outdoors on patio tiles. One GripX will cover up to 150 square feet of natural stone surface. To achieve the best results and even coating it is recommended to apply GripX anti-slip sealer with a 3/8-inch nap roller. GripX non-slip coating and sealant is 100% transparent. It creates a clear glossy and barefoot-friendly finish on concrete and other natural stone surfaces. This non-skid concrete and stone coating is highly durable and is designed to endure harsh climates. GripX anti-slip concrete coating is easy to use. The product cures in 24 hours and requires only light pressure-washing for maintenance. GripX is also a chemical- and UV-resistant anti-slip solution that is non-yellowing. Prior to full application it is suggested that GripX be tested on a discrete patch of surface. Into a separate container pour GripX and stir well to make sure the additive is evenly dispersed. Unsure consistent distribution of the non-slip additive. Apply two coats of the non-slip sealer. Let the first coat dry for two to four hours before applying the second coat. Apply the second coat at a right angle to the first coat. To guarantee increased toughness and grip more coats may be applied depending on the absorptive quality of the surface. Allow the anti-slip coating to dry for 24hrs before use.