New and improved Gen2.1 Disaster Prevention Kit | Safeguards fuel injectors rails lines and tank from CP4 debris | All OE-style quick connects easy install Fuel supply split-off 25 inches away from the CP4 pump | Return filter isolates CP4 debris before it goes on to the tank | Gen2.1 billet filter head accepts standard spin-on fuel filters Comes with Donaldson P550943 fuel filter 9-micron at 99% efficiency | One part number fits all years 2011+ | Improves CP4 output past 3000 RPM | Made in the USA The SS Diesel Motorsport Gen2.1 6.7L Power Stroke CP4 Bypass Kit features all quick connect lines that will eliminate the need for cutting the factory supply line which is a debris introduction point especially if the cut is not thoroughly deburred. It also eliminates the need to use a compression fitting which is a potential leak point. The OE-style quick connect lines also eliminate any threaded joints that are further leak points and have the potential of generating debris during install. The main task of both kits is to supply the CP4 case and the metering unit/plungers independently with clean filtered fuel and to reroute case fuel back to the tank. There are two major improvements in how the Gen2.1 kit accomplishes it. The Gen2.1 fuel supply is split off into two separate lines 25 inches from the CP4 which will eliminate the chance of contaminated case fuel back-feeding into the clean fuel supply line. The original bypass kit splits off within an inch of the pump and is more susceptible to debris back-feeding if the CP4 failure produces enough debris to clog the fuel return system. The other improvement is what happens to the debris when it exits the pump case. The Gen2.1 kit features a billet return filter head that accepts a readily-available Donaldson P550943 spin-on fuel filter which prevents debris from reaching the tank fuel lines and supply pump. Previously unfortunate victims of a CP4 failure with the good fortune of having an original bypass kit installed would still need to drop the tank and deal with all of the debris created by the failed CP4. One would think that major improvements would come at a major price increase. Having a clear understanding of common rail diesel fuel systems and decades of OE engineering experience enabled the engineers at SS to make improvements without increasing production costs. Thanks to efficient design and use of material the SS Diesel Motorsport Gen2.1 6.7L Power Stroke CP4 Bypass Kit #CP4-6.7F-BP-G2.1 delivers much more value than the original. Theres no longer a need to distinguish what year the truck was made the new Gen2.1 Bypass Kit will fit 2011 and up Ford Super Duty pickup trucks with the 6.7 Power Stroke Diesel engine.
- Safeguards fuel injectors rails lines and tank from CP4 debris
- All OE-style quick connects
- 2-micron return filter tested for flow and efficiency
- Clear filter bowl for inspection
- Fuel supply split-off 25 inches away from the CP4 pump
- Made in the USA
- 2011-2019 6.7L Powerstroke Diesel