No products in the cart.
Battery Protect 12/24-Volt 65 amp Description nSelf-selecting 12/24V The BatteryProtect automatically detects system voltage Easy programming The BatteryProtect can be adjusted to connect/disconnect at various different voltages. The seven-segment screen will indicate which setting has been chosen. A special configuration for Li-Ion batteries. In this mode the BatteryProtect can be controlled by the BMS of the VE.Bus. Ultra low current consumption. This is important for Li-Ion batteries especially after a low voltage disconnection. Surge Protection to prevent over-voltage damage on sensitive appliances the charge is disconnected whenever the DC voltage exceeds 16 V or 32 V. Fire proof No relays but with MOSFET switches therefore no sparks. Delayed alarm output. The alarm output is triggered if the battery voltage falls below the pre-set disconnect level for more than 12 seconds. Therefore the alarm will not be triggered when starting the engine. Normally the alarm output is us.
- Automatically detects system voltage
- Can be set to engage / disengage at several different voltages
- Maximum continuous load current 65A
- Peak current during 30 seconds 300A