No products in the cart.
Product Details: Applies easily with a lambswool applicator floors quality China bristle brush or one recommended for use with oil-based paints. Sanding is not necessary between coats for adhesion purposes Waterlox Original Satin Finish is designed as the top coat portion of our finishing system which performs best over bare wood Apply all intended coats to a small inconspicuous area or a scrap piece of wood from the project and allow to dry prior to applying to the entire surface. For softwood species such as pine fir or cherry apply 2 coats of the Waterlox Original Sealer/Finish. For best results apply all coats liberally at approximately 500 square feet per gallon per coat. No thinning necessary. Clean application tools immediately with mineral spirits or turpentine Waterlox Original Satin Finish contains flattening agent which can settle to the bottom of the can. Stir contents thoroughly before and during use. Waterlox Original Satin Finish is designed as the top coat portion of our finishing system which performs best over bare wood. For best results apply all coats liberally at approximately 500 square feet per gallon per coat. No thinning necessary. Clean application tools immediately with mineral spirits or turpentine. Waterlox Original Satin Finish contains flattening agent which can settle to the bottom of the can. Stir contents thoroughly before and during use. VOC 524 g/L.
- Waterlox Original Satin Finish is designed as the top coat portion of our finishing system which performs best over bare wood.
- For best results apply all coats liberally at approximately 500 square feet per gallon per coat. No thinning necessary.
- Clean application tools immediately with mineral spirits or turpentine.
- Waterlox Original Satin Finish contains flattening agent which can settle to the bottom of the can. Stir contents thoroughly before and during use.
- VOC 524 g/L.